175 lines
4.9 KiB
C
175 lines
4.9 KiB
C
/*******************************************************************
|
||
* Pilot Software
|
||
*
|
||
* Copyright(c) 1995-1997, Palm Computing Inc., All Rights Reserved
|
||
*
|
||
*-------------------------------------------------------------------
|
||
* FileName:
|
||
* HardwarePrv.h
|
||
*
|
||
* Description:
|
||
* Private Hardware Equates. This header file
|
||
* contains equates that are common across all platforms but that
|
||
* change value for each hardware rev and platform.
|
||
*
|
||
* History:
|
||
* 4/27/95 RM - Created by Ron Marianetti
|
||
*
|
||
*******************************************************************/
|
||
|
||
#ifdef NON_PORTABLE // So app's don't mistakenly include this
|
||
|
||
#ifndef __HARDWAREPRV_H__
|
||
#define __HARDWAREPRV_H__
|
||
|
||
|
||
// This must be defined on the command line before using this header!!
|
||
#if HW_TARGET != HW_TARGET_NONE
|
||
#ifndef HW_REV
|
||
#error THE COMPILER VARIABLE HW_REV MUST BE DEFINED!!
|
||
#endif
|
||
#endif
|
||
|
||
|
||
|
||
/***********************************************************************
|
||
* Equates for Emulation Mode
|
||
***********************************************************************/
|
||
#if HW_TARGET == HW_TARGET_NONE
|
||
|
||
#define hwrCardSize 0x10000000L // Size of each card slot
|
||
|
||
// DOLATER.. take this out???
|
||
// Under native mode, this mask can be used to convert a pointer to a card offse
|
||
//#define hwrCardOffsetMask 0x0FFFFFFFL
|
||
|
||
|
||
#endif
|
||
|
||
|
||
|
||
/***********************************************************************
|
||
* First Rev of the Pilot Hardware
|
||
***********************************************************************/
|
||
#if HW_TARGET == HW_TARGET_TD1
|
||
|
||
|
||
// Define location and setup for the 68328 Dragonball chip
|
||
#define hwr68328Base 0xFFFFF000L // Base address of 68328
|
||
|
||
|
||
|
||
// Define the base of card 0 and the size of each card slot.
|
||
#if HW_REV <= 3
|
||
#define hwrCardBase0 0x00800000L // starts here
|
||
#define hwrCardSize 0x00800000L // Size of each card slot
|
||
#define hwrFlashBase 0x00F00000L // Base of Flash ROM
|
||
#define hwrFlashSize 0x00080000L // Size of Flash ROM
|
||
#define hwrCardOffsetMask 0x007FFFFFL // Used to convert a pointer to a card offset
|
||
|
||
#else // HW_REV >= 4
|
||
#define hwrCardBase0 0x10000000L // starts here
|
||
#define hwrCardSize 0x10000000L // Size of each card slot
|
||
#define hwrFlashBase 0x10C00000L // Base of Flash ROM
|
||
#define hwrFlashSize 0x00100000L // Size of Flash ROM
|
||
#define hwrCardOffsetMask 0x0FFFFFFFL // Used to convert a pointer to a card offset
|
||
|
||
#endif
|
||
|
||
// Define the Flash width
|
||
#define hwrROMWidth 2
|
||
|
||
// Define location and setup for the 68681 Duart
|
||
#define hwrDuartBase 0x10E00000 // Base address of DUART
|
||
|
||
#define hwrDuartClock 3686400 // in Hertz (3.6864 MHz)
|
||
|
||
// Setting of ACR register except for baud rate select
|
||
// Timer mode - Crystal clock /1
|
||
#define hwrDuartACRReg 0x60
|
||
|
||
|
||
#endif // HW_TARGET == HW_TARGET_TD1
|
||
|
||
|
||
|
||
|
||
/***********************************************************************
|
||
* Motorola 68302 Development board
|
||
***********************************************************************/
|
||
#if HW_TARGET == HW_TARGET_302
|
||
|
||
// Define # of card slots and base address of each slot
|
||
#define hwrNumCardSlots 1 // 1 card slot
|
||
#define hwrCardBase0 0x00000000L // starts at 0
|
||
#define hwrCardSize 0x10000000L // Size of each card slot
|
||
|
||
// Under native mode, this mask can be used to convert a pointer to a card offse
|
||
#define hwrCardOffsetMask 0x0FFFFFFFL
|
||
|
||
|
||
// Define location and setup for the 68681 Duart
|
||
#define hwrDuartBase 0x00400000 // Base address of DUART
|
||
|
||
#define hwrDuartClock 3686400 // in Hertz (3.6864 MHz)
|
||
|
||
#define hwrDuartIntVec 25 // Interrupt vector number for DUART
|
||
|
||
|
||
// Setting of ACR register except for baud rate select
|
||
// Timer mode - Crystal clock /1
|
||
#define hwrDuartACRReg 0x60
|
||
|
||
|
||
// Define the Flash base address
|
||
#define hwrFlashBase 0x00200000L
|
||
#define hwrROMWidth 2
|
||
|
||
|
||
#endif // HW_TARGET == HW_TARGET_302
|
||
|
||
|
||
|
||
|
||
/***********************************************************************
|
||
* Motorola 68328 Emulator Development board
|
||
***********************************************************************/
|
||
#if HW_TARGET == HW_TARGET_328EMU
|
||
|
||
|
||
// Define # of card slots and base address of each slot
|
||
#define hwrNumCardSlots 1 // 1 card slot
|
||
#define hwrCardBase0 0x00000000L // starts at 0
|
||
#define hwrCardSize 0x10000000L // Size of each card slot
|
||
|
||
// Under native mode, this mask can be used to convert a pointer to a card offse
|
||
#define hwrCardOffsetMask 0x0FFFFFFFL
|
||
|
||
|
||
// Define location and setup for the 68681 Duart
|
||
#define hwrDuartBase 0x00F00000 // Base address of DUART
|
||
|
||
#define hwrDuartClock 3686400 // in Hertz (3.6864 MHz)
|
||
|
||
#define hwrDuartIntVec 25 // Interrupt vector number for DUART
|
||
|
||
|
||
|
||
// Setting of ACR register except for baud rate select
|
||
// Timer mode - Crystal clock /1
|
||
#define hwrDuartACRReg 0x60
|
||
|
||
|
||
|
||
// Define the Flash base address
|
||
#define hwrFlashBase 0x00400000L
|
||
#define hwrROMWidth 2
|
||
|
||
|
||
|
||
#endif // HW_TARGET == HW_TARGET_328EMU
|
||
|
||
|
||
#endif //__HARDWARE_H__
|
||
#endif // NON_PORTABLE
|